| 是否进口：否 | 产地：香港 | 品牌：玖城 |
| 产品名称：冲压拉伸油 | 产品规格：18L/桶，200L/桶 | 货号： C508 C509 |
| 执行标准：国标 | 主要用途：适于碳素钢、不锈钢制品的中重度弯曲、拉伸、冲压。 |
玖城牌冲压拉伸油
产品型号:C508 C509
产品描述:玖城牌冲压拉伸油是以精制矿物油、减摩剂、极压抗磨剂等多种添加剂组成。具有较高的油膜强度和较低的摩擦系数，适合对防锈有特别要求的钢板、冷轧板、镀锌板、表面处理钢的立体拉伸成型，产品加工后有一定的防锈期，免去防锈工序，容易清洗。
产品特点:
能有效减少工件与模具的摩擦，降低磨损。
有助于金属的滑动，利于成型。
高温状态下具有良好的热稳定性。
具有良好的光洁功能，提高加工精度，保护模具，延长模具寿命。
具有强韧的油膜，可有效减少划痕、划伤、`烧结焊合、破裂等现象的发生。
产品应用:
适于碳素钢、不锈钢制品的中重度弯曲、拉伸、冲压。
JC Stamping Tensile Oil
Product number:C508 C509
product description:
JC Stamping tensile oil is composed of refined mineral oil, antifriction agent, extreme pressure antiwear additive and so on.With high oil film strength and low friction coefficient.It is suitable for solid stretch forming of steel plate, cold rolled sheet, galvanized sheet and surface treated steel with special requirements for rust prevention.After product processing, there is a certain rust prevention period, which eliminates avoid antirust process and is easy to clean.
characteristics:
It can effectively reduce friction between workpiece and die and reduce wear.
It helps the sliding of metal, which is beneficial to forming.
It has good thermal stability at high temperature.
It has good function of clean, improves machining accuracy, protects moulds and prolongs the service life of dies.
With strong oil film, it can effectively reduce the occurrence of scratches, scratches, sinter welding and cracking.
Recommended use:
Suitable for moderate and severe bending, stretching and stamping of carbon steel and stainless steel products.
玖城牌冲压拉伸油典型数据：Typical data of JC Stamping tensile oil:
项目Project | 典型数据Typical data |
运动粘度40℃，mm2/s Kinematic viscosity40℃,mm2/s | 90~110 |
闪点（开口），℃ Flash point（open）,℃ | ≥170 |
倾点，℃ Pour point,℃ | ≤-3 |
铝片腐蚀（100℃，3h） Aluminum corrosion（100℃,3h） | 合格PASS |
油膜强度（PB），N Oil film strength（PB）,N | ≥667 |
