| 是否进口：否 | 产地：香港 | 品牌：玖城 |
| 产品名称：放电加工液 | 产品规格：18L/桶，200L/桶 | 货号：EDM-1 EDM-2 |
| 主要用途：适用于各类国产和进口电火花加工机床的放电加工。 | 型号：EDM-1 EDM-2 |
玖城牌放电加工液
产品型号:EDM-1 EDM-2
产品描述:玖城牌放电加工液以深度精制矿物油为基础油，加入多种复合添加剂调合而成，低硫低芳烃，***、无味，黏度小，流动性好，具有良好的冷却性和排屑性，闪点较高，安全性好。
产品特点:
较窄的流程、低硫低芳烃，***性，环保健康。
粘度小，冷却性及排屑性能良好，提高模具表面精度。
较高的闪点，降低安全隐患。
较低的挥发性，具有良好的使用安定性。
产品应用:
适用于各类国产和进口电火花加工机床的放电加工。
JC Electric Discharge Machining Fluid
Product number:EDM-1 EDM-2
product description:
JC EDM fluid is based on the deep refined mineral oil as the base oil，and add a variety of compound additives refined.Low sulfur and low aromatics, non-toxic, tasteless, low viscosity and good fluidity.It has good cooling and chip removal, high flash point and good safety.
characteristics:
Narrow process, low sulfur and low aromatics, no toxicity, environmental health.
Low viscosity, good cooling and chip removal performance, improve mold surface accuracy.
High flash point to reduce security risks.
Low volatility and good stability.
Recommended use:
It is suitable for electrical discharge machining of all kinds of domestic and imported EDM machines.
玖城牌放电加工液典型数据：Typical data of JC EDM fluid:
项目Project | 典型数据Typical data | |
EDM-1 | EDM-2 | |
运动粘度40℃，mm2/s Kinematic viscosity40℃,mm2/s | 1.489 | 2.234 |
铜片腐蚀（100℃，3h）Copper corrosion（100℃，3h） | 合格PASS | 合格PASS |
闪点（闭口），℃ Flash point（close）,℃ | 102 | 111 |
